Two-and-a-half day course where you learn the basics of Lägler machine maintenance and operation as well as an introduction to the Berger-Seidle range of floor coatings.

Wednesday, June 1: 8AM-4:30PM

• Lägler Education
  • Theory, machine maintenance, operation and sanding techniques
• Berger-Seidle Education Part 1
  • Filler and Primer

Thursday, June 2: 8AM-4:30PM

• Berger-Seidle Education Part 2
  • Various Finish and Oil Intro

Friday, June 3: 8AM-2PM

• Intercoat abrasion
• Final Coats
• Wrap-up Discussion

Training Location:

Lägler North America Headquarters, 12875 E. 42nd Avenue, Suite #30, Denver CO 80239

Hotel and Travel Information:

Lodging will be provided for two nights (June 1-June 2) and meals are also provided. Travel to and from Denver and from the airport to the training facility/hotel is the responsibility of attendees.

There is a minimum of (10) attendees required for this course to take place. If the course is cancelled for any reason, refunds for the cost of the event would be administered but Lägler and Berger-Seidle are not responsible for any costs, damages, or other expenses of any kind, including and without limitation, transportation due to cancellation.

Cost:

There is a fee of $299 to attend this course. Once your RSVP form is submitted, you will be contacted by a Lägler North America team member within three (3) business days to invoice you for the course. Once this fee is payed, your spot will be secured.

CLICK HERE TO REGISTER

Prerequisites: 1 year of installation experience OR attendance at Basic Installation School, plus completion of the NWFA University Installation Safety Course.

Pricing: $649 per person for NWFA Members or $749 for Non-Members.

This 3-day course includes in depth training on jobsite preparation, layout, understanding the science of wood, analysis of solid and engineered flooring, practice and instruction for nail down and glue down installation methods of unfinished, factory finished, solid, and engineered flooring, as well as learning a variety of floor repair techniques and how to incorporate simple design elements into a floor.

NWFA Certification Testing for Installation offered on Friday, July 29th for those with 3 or more years of installation experience and a member of NWFA in good standing. Additional fee of $400.

CLICK HERE FOR MORE INFO AND TO REGISTER

Training Information:

$449.00 per attendee.  Fee includes: Lunch, meals and training materials. 

Location: 

400 Van Camp Road, Bowling Green, Ohio 43402

Description:

For the Wood Floor Professional: Basic Coatings is partnering with Lagler North America to offer a full sand & finish training class. Learn all about the Lagler equipment line including a deep dive in proper operation, sanding procedures and maintenance. Then the Basic Coatings Product Training School which is an excellent opportunity for attendees to learn the entire Basic Coatings product line. In addition to reviewing the products, everyone will participate in hands-on demonstrations of our complete systems (stains, sealers, finishes, equipment, and cleaners/maintenance, etc.).

Course Prerequisite: Sand & Finish Wood Floor Contracting

Hotel Lodging:

Hotel information and confirmation numbers will be sent in advance of training.

 

CONTACT:

Jim Owen
[email protected]
(419) 250-9689

CLICK HERE TO REGISTER 

Advanced Lägler and Berger-Seidle course where you cover a wide range of information including Subfloor Prep, Equipment Maintenance & Operation, Primers, Fillers, and Finish, Oils + Color. Please refer to schedule below:

Monday, October 24

• 12pm – 5pm
  • Concrete prep with the Single
  • Primer P and M1

Tuesday, October 25

• 9am – 5pm
  • Lägler equipment theory, maintenance, and operation
  • Filler

Wednesday, October 26

• 9am – 5pm
  • Oil
  • Primer and Finish

Thursday, October 27

• 9am – 5pm
  • Intercoat abrasion
  • Final coats

Friday, October 28

• 9am – 2:30pm

• • Pro 100 oil applied to oiled surfaces
  • Hard oil applied to oiled surfaces
  • Wrap up and shop talk from 12-2:30pm

Training Location:

Lägler North America Headquarters, 12875 E. 42nd Avenue, Suite #30, Denver CO 80239

Hotel and Travel Information:

Lodging will be provided for four nights (check in October 24, check out October 28) at Drury Inn & Suites Denver Central Park. Additional nights at the hotel must be purchased and booked by attendee.

Meals will be provided from lunch on Monday thru lunch on Friday.

Travel to and from Denver and from the airport to the training facility/hotel is the responsibility of attendees.

Cost:

There is a fee of $499 to attend this course. Once your RSVP form is submitted, you will be contacted by a Lägler North America team member within three (3) business days to invoice you for the course. Once this fee is payed, your spot will be secured.

CLICK HERE TO REGISTER

Training Information:

$449.00 per attendee.  Fee includes: Lunch, meals and training materials. 

Location: 

400 Van Camp Road, Bowling Green, Ohio 43402

Description:

For the Wood Floor Professional: Basic Coatings is partnering with Lagler North America to offer a full sand & finish training class. Learn all about the Lagler equipment line including a deep dive in proper operation, sanding procedures and maintenance. Then the Basic Coatings Product Training School which is an excellent opportunity for attendees to learn the entire Basic Coatings product line. In addition to reviewing the products, everyone will participate in hands-on demonstrations of our complete systems (stains, sealers, finishes, equipment, and cleaners/maintenance, etc.).

Course Prerequisite: Sand & Finish Wood Floor Contracting

Hotel Lodging:

Hotel information and confirmation numbers will be sent in advance of training.

CONTACT:

Jim Owen
[email protected]
(419) 250-9689

**Do not book airline reservations until we have confirmed in writing to you that you are confirmed for the event.** 

CLICK HERE TO REGISTER