Lägler North America Blog

NWFA Sand + Finish Training at Lägler N.A.
NWFA Sand + Finish Training at Lägler N.A.
Lägler North America - Tuesday, September 12, 2017

Guest Post by Brett Miller, NWFA VP of Education & Certification  

comments (0) Trackbacks (0) Permalink

Lägler Micro-Innovations Make the Difference
Lägler Micro-Innovations Make the Difference
Lägler North America - Tuesday, April 25, 2017

Have you ever compared a decades-old Lägler HUMMEL and a new one, and wondered what’s changed? We get it. At first glance, they look a lot alike. Two things:  

comments (0) Trackbacks (0) Permalink

6 Things You Need to Know About Sanding Drums
6 Things You Need to Know About Sanding Drums
Lägler North America - Tuesday, March 28, 2017

HUMMEL owners, tell us: How easy is it to remove and replace your HUMMEL sanding drum? Yeah, easy-easy. DIY in the shop, at your trailer, on the jobsite floor, right? No need to waste time or money for someone else to do it.  

comments (0) Trackbacks (0) Permalink

Sanding Drums: Lägler vs. Aftermarket
Sanding Drums: Lägler vs. Aftermarket
Lägler North America - Tuesday, March 14, 2017

There are a lot of parts to care about with a “big machine” like Lägler’s HUMMEL. But even if you keep it purring, clean and rolling smoothly, it won’t do you any good if you use a sanding drum that mars the floor with edge marks, waves and chatter. 

comments (0) Trackbacks (0) Permalink

How to Mount the Lägler TRIO V-Belt
How to Mount the Lägler TRIO V-Belt
- Tuesday, February 14, 2017

How to Mount the Lägler TRIO V-Belt  

comments (0) Trackbacks (0) Permalink

How to Remove the Lägler TRIO V-Belt
How to Remove the Lägler TRIO V-Belt
- Tuesday, January 31, 2017

How to Remove the Lägler TRIO V-Belt  

comments (0) Trackbacks (0) Permalink

How (and Why) to Level the Wheels of the Lägler HUMMEL®
How (and Why) to Level the Wheels of the Lägler HUMMEL®
Lägler North America - Tuesday, January 03, 2017

How to Level the Wheels of the Lägler HUMMEL®  

comments (0) Trackbacks (0) Permalink

The Most Popular, Most Helpful Lägler N.A. Content of 2016
The Most Popular, Most Helpful Lägler N.A. Content of 2016
Lägler North America - Tuesday, December 27, 2016

We’re doing what people do at the end of one year, beginning of another. We look back at what we did well and what we can improve. We always want to keep doing better.  

comments (0) Trackbacks (0) Permalink

How to Replace the Lägler FLIP® V-Belt
How to Replace the Lägler FLIP® V-Belt
Lägler North America - Tuesday, November 29, 2016

Have you noticed your Lägler FLIP® acting a bit different lately? Maybe you’re having a tough time starting it or the working speed has decreased. Maybe it feels like it isn’t running as smoothly as usual or the noise has gotten louder. The FLIP might be losing its steam to suck dust. It’s maintenance time.  

comments (0) Trackbacks (0) Permalink

Lägler TRIO: How to Change the Tooth Belt
Lägler TRIO: How to Change the Tooth Belt
Lägler North America - Wednesday, November 02, 2016

Good condition of the tooth belt, or the belt that turns the three sanding plates (discs) of the Lägler TRIO fine sanding machine, is critical. No belt, no sanding. It's that simple.
 

comments (0) Trackbacks (0) Permalink