Lägler North America Blog

Sanding With A Big Machine
Sanding With A Big Machine
Lägler North America - Tuesday, August 15, 2017

A lot of floor sanding pros probably are confident in their “how to sand with a big machine” knowledge. Many of you should be. Yet here we are talking about it, so hang with us …  

comments (0) Trackbacks (0) Permalink

Abrasives: Cost Vs. Value of Quality
Abrasives: Cost Vs. Value of Quality
Lägler North America - Tuesday, July 04, 2017

There are two approaches to floor sanding: guesswork and science.
 

comments (0) Trackbacks (0) Permalink

How to Minimize Sanding Efforts + Maximize Profits
How to Minimize Sanding Efforts + Maximize Profits
Lägler North America - Tuesday, May 23, 2017
By Karl Lägler
 

comments (0) Trackbacks (0) Permalink

The Showdown: TRIO vs. Multi-Disc Attachments
The Showdown: TRIO vs. Multi-Disc Attachments
Lägler North America - Tuesday, February 28, 2017

Lägler engineers took on a special “Coke vs. Pepsi” kind of project in 2015. They spent more than eight months testing to see if the TRIO really held its own against competitors’ multi-disc attachments, and then analyzing their test results.  

comments (0) Trackbacks (0) Permalink

How to Use the Lägler FLIP Corner Attachment
How to Use the Lägler FLIP Corner Attachment
Kathryn Thurn - Wednesday, October 05, 2016

Flexibility of tools on the job stands out. And the Lägler FLIP, with its corner attachment, can be one of the difference-makers on the job site.  

comments (0) Trackbacks (0) Permalink

Lägler TRIO: Sanding Disc Arrows + Abrasives
Lägler TRIO: Sanding Disc Arrows + Abrasives
Lägler North America - Wednesday, September 21, 2016

Have you noticed the six arrows on the bottom of a Lägler TRIO sanding disc?  

comments (0) Trackbacks (0) Permalink